Nemesis Mini Typhon Tower, Руководство пользователя, Страница: 16 / 17

Nemesis™ UV-C Typhon™ User Manual_V1.1
16
Mini Tower Assembly:
1. Unpack all parts and hardware
2. Assemble the center post by bolting the handle to the top and bottom portions of the
center post
3. Attach the rectangular bottom plate to the center post
4. Attach Typhon™ Fixtures
a. For Three Typhon™ Fixtures use the holes for the
triangular configuration:
b. Ensure the handle will be centered between Typhon™
fixtures as pictured. Ensure the Typhon™ fixtures are
positioned correctly.
5. Bolt Typhon™ fixtures into the bottom plate
6. Once all Typhon™ Fixtures are mounted to the bottom plate, line up the holes at the top
of the fixture with the corresponding holes on the top plate.
7. Utilize the HARDWARE to attach the Typhon™ Fixtures to the Top Plate
8. Once all fixtures are attached to the top plate, secure the top plate with the center bolt.
9. The Mini Tower is built! Take a moment to ensure all hardware is properly attached to
the fixture.
•
If you have any issues, contact Nemesis™ Customer Support at:
(469)-466-2UVC
Power
1. Included with your Mini Tower is 1 Power Cable and 3 Power Jumpers to power the
Typhon™ fixtures
2. The Power Cable needs to be plugged into the Tru1 POWER IN connection on the side
with the Red Buzzer
3. The Power Jumpers:
a. One end will plug into the “POWER OUT” connection on the sensor side
(opposite the POWER IN on the Buzzer Side)
b. The other will plug into the POWER IN connection on the adjacent fixture.
c. Repeat this process until all Typhon™ units have power
d. one