Nemco 6900 Series, Руководство по обслуживанию

Страница: 6 / 20

INSTALLATION INSTRUCTIONS
Power Supply Requirements
The sandwich press MUST be connected to a properly grounded receptacle that is correctly rated for the
current listed on the device’s product label or MUST be hard-wired to the supply with a proper ground.
The sandwich press should be connected to its own power circuit ( Type C or Time Delay circuit breaker ).
Connecting this device to a circuit that is shared with other appliances could cause the circuit breaker to
trip when appliances with high inrush current turns on.
Ground Requirements
This device MUST be connected to a ground that meets or exceeds building codes. DO NOT install the
sandwich press in a location that doesn’t have a proper ground. Doing so could result in serious injury or
DEATH.
Appliance Positioning
To maintain sufficient ventilation for the sandwich press, you must have at least 2 inches (51mm) of
clearance on all sides of the unit and at least 2 inches above the upper enclosure when it is open. There
must also be at least 2” of clearance behind the flexible conduit with upper enclosure opened and closed.
Make sure that there isn’t any heat sources such as fryers, ranges, griddles, etc. If the sandwich press must
be located next to a before mentioned heat source, then a heat shield should be constructed between
the appliances to protect the sandwich press from the extreme heat and grease. Ignoring this warning will
result in voiding the manufacturer’s warranty.
FEATURES