STEP 7:
Make wiring connections from branch circuit
conductors to factory provided lead wires. Refer to
NEC/CEC codes and follow all applicable local
standards.
The MR luminaire is suitable for daisy-chain wiring of
multiple luminaires on a single circuit. Input supply
wiring through one NPT hub as described in Step 5
above. Feed input wiring into the luminaire and
connect to LED driver supply wires using the wiring
connectors provided. Connect output wiring using the
same wiring connectors. Feed output wiring through
the remaining NPT hub as described in Step 5 above.
For dimming, connect 18AWG or larger conductors to
dimming connection points.
STEP 8:
Close Power Supply Cavity Lid.
A.
Re-install the power supply lid using six (6)
Captive M4 screws.
B.
Tighten M4 Captive screws to 2 Nm (17in-lbs)
Line - Black
Neutral - White
Ground - Green
Red (+)
Blue ( - )
Violet (+)
Grey (-)
0-10V
Dimming
Control
LED
Module
LED
Driver
TM
Nemalux
I N D U S T R I A L
MR-GEN
rev. A-15
4-4
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
MADE IN CANADA
