Nelson NWC611D, Руководство пользователя

Страница: 10 / 27

NWC 611
10
Key to three ‐ phase electrical system diagram
NTCB Boiler temperature probe EVA Aquastop solenoid valve
NTCV Tank temperature probe EVR Regeneration solenoid valve
SDET Detergent sensor EVS Brine discharge solenoid valve
SBRIL Rinse aid sensor PB Rinse aid peristaltic pump
SFIL Filter sensor PD Detergent peristaltic pump
FLMT Flowmeter EVF Filler solenoid valve
SS Salt sensor PS Drain pump
RD Door sensor PLB Boiler pressure switch
PR Rinsing pump PLV Tank level pressure switch
PL Washing pump PSV Tank safety pressure switch
PLB Boiler level pressure switch AQS Aquastop microswitch
THB Boiler safety thermostat SB Motherboard
M Terminal board SI Interface board
LF RFI filter TM Terminal board ground
FUSE Mains fuse TV Tank ground
CB Boiler contactor TF RFI filter ground
RB Boiler heating element TPL Washing pump ground
T ‐ FU Overtemperature fuse TPR Rinsing pump ground
THRV Tank safety thermostat TRV Tank heating element ground
RV Tank heating element TB Boiler heating element ground
Warning !!!
The warewasher is always powered up unless the master switch is turned off.
Connect the appliance to the user’s earth system. The terminal for the connection is
in the bottom right ‐ hand corner of the appliance.
The earth wire (PE) is yellow ‐ green in colour, the neutral wire (N) is blue and the live
wires (L1, L2, L3) are black, grey and brown.
THE POWER SUPPLY CABLE MUST BE REPLACED BY THE MANUFACTURER OR AN
AUTHORISED SERVICE CENTRE TO PREVENT ALL RISKS.