Neilsen DR CT1080, Оригинальное руководство пользователя

Страница: 4 / 8

4
SYMBOLS
In this manual and/or on the machine the following symbols are used:
WARNING:
IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE
OPERATING TOOL. IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE
INFORMATION IN THIS MANUALINTO THE HANDS OF THE OPERATOR. FAILURE TO
OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
FOR USE
•
Impact wrenches are designed for use in general automotive repair, body shops, front end
service and light truck and farm equipment applications.
PLACING TOOL IN SERVICE
• Always operate, inspect and maintain this tool in accordance with all regulations (local, state,
federal and country), that may apply to hand held/hand operated pneumatic tools.
• For safety, top performance, and maximum durability of parts, operate this tool at 0.65Mpa
maximum air pressure at the inlet with 3/8” (10 mm) inside diameter air supply hose.
• Always turn off the air supply and disconnect the air supply hose before installing, removing or
adjusting any accessory on this tool, or before performing any maintenance on this tool.
• Do not use damaged, frayed or deteriorated air hoses and fittings.
• Be sure all hoses and fittings are the correct size and are tightly secured.
• Always use clean, dry air at 0.65Mpa maximum air pressure. Dust, corrosive fumes and/or
excessive moisture can ruin the motor of an air tool.
• Do not lubricate tools with flammable or volatile liquids such as kerosene, diesel or jet fuel.
Denotes risk of personal injury, loss of life or damage to the tool in
case of non-observance of the instructions in this manual.
Wear hearing protection.
Wear safety goggles.
Contact with or inhalation of dust coming free during use (e.g.
lead-painted surfaces, wood and metal) can endanger your health
and the health of bystanders. Always wear appropriate protective
equipment, such as a dust mask. Always use proper dust
extraction during use.
Wear gloves.