Neilsen CT4793, Оригинальное руководство пользователя

Страница: 9 / 12

7
4. OPERATION
Intended use
This laminate/parquet repair kit is intended for the repair of laminate, parquet,
cork and wood or plastic surfaces. The supplied wax melter is intended
exclusively for the melting of hard wax suitable for these applications. The
appliance is intended exclusively for domestic use. Do not use the appliance for
commercial or industrial applications. Use the appliance only in a dry
environment resp. in indoor areas. This appliance is not intended for any other
use or for uses beyond those detailed. Claims of any kind for damage resulting
from unintended use will not be accepted. The user alone bears the risk.
Switching the appliance on/off
♦ To switch the appliance on, place the On/Off switch-3 at the position "ON".
♦ Press and hold the activation button-4 to heat up the wax melter tip-2.
♦ To switch the appliance off, place the On/Off switch-3 at the position "OFF".
Application example
1. Preparation (Fig. A)
♦ Clean the damaged area with the spatula-7 and remove all loose parts. Press
the edges of the damaged area round.
2. Colour selection (Fig. B)
♦ Select the matching colour tone.
Ensure that several colour tones, from light to dark, are always used.
3. Melting and filling (Figs. C + D)
♦ Place the On/Off switch
‐
3 at the position "ON" to switch the appliance on.
♦ Press and hold the activation button-4 to heat up the wax melter tip
‐
2.
♦ Now melt small portions of the hard wax(11) and place them into the damaged
area, until it is slightly overfilled. Start with the light colour tones and progress
step by step to the dark colour tones.
NOTICE
► At pressure points it is often sufficient if you use only the transparent hard
wax .
4. Filling (Fig. E)
♦ For vertical surfaces it is recommended to mix the colour tone beforehand,
collect it on the spatula-7 and then fill the damaged area.
5. Smoothing (Fig. F)
♦ Allow the hard wax to cool for a few seconds (about 10 seconds).
♦ After cooling, smooth any protrusion with the planing grooves of the scraper-7.