Neilsen CT3995, Инструкция по эксплуатации, Страница: 9 / 16

Installing or removing socket
Always be sure that the tool is switched off and the battery pack is removed
before installing or removing the socket.
To install the socket, push it onto the anvil (1) of the tool until it locks into place. To
remove the socket, simply pull it off.
Using the machine
Forward / Reverse
Select the direction of rotation by pressing
the forward / reverse switch (2).
The forward / reverse switch has a lock
function and cannot be used when the
trigger is depressed.
Ensure the impact wrench has come to a complete stop before
changing direction
Switching ON / OFF
To switch ON: Pull the trigger (3)
To switch OFF: Release the trigger
LED worklight
The impact wrench is equipped with an LED worklight(7).
The LED worklight
illuminates immediately after
pulling
the trigger and turns off once you
release the trigger.