Neilsen CT3950, Оригинальное руководство пользователя

Страница: 8 / 12

6
6. OPERATION
WARNING! Ensure you read, understand and apply safety instructions before
use.
1. Only use impact sockets which are specifically designed for use with an impact
wrench.
2. Connect the wrench to the air hose. Run the tool for a few seconds to check if
it is running properly.
3. Place the socket fully over the subject nut and depress the trigger to operate
the wrench.
4. You can adjust the torque by rotating the knob. Select the desired torque on
the switch located at the back or bottom part of the tool.
5. To change direction, press the “F” or “R” switch. The “F” indicates forward
and the “R” indicates Reverse.
6. DO NOT use any additional force upon the wrench in order to remove a nut.
7. DO NOT allow the wrench to free run for an extended period of time as this will
reduce bearing life.
8. After finishing the job, disconnect the air hose and put the tool away in a safe
and appropriate place to avoid any personal injury and/or damage to the tool;
9. Check if the hose is depressurized before disconnecting it from the tool.
7. MAINTENANCE
WARNING! Disconnect the wrench from the air supply before changing
accessories, servicing or performing maintenance.
Replace or repair damaged parts. Use genuine parts only. Unauthorised parts
may be dangerous and will invalidate the warranty.
1. If the air system does not have an oiler, lubricate the air wrench daily with a
few drops of #10 oil dripped into the air inlet.
2. Periodically grease the impact system in impact tools.
3. Verify periodically the condition of accessories (impact sockets and other
impact accessories) in tools.
4. Periodically check moving parts in tools.
5. Periodically check the air network tubing and hoses for any possible leaks,
condensations, and any other harmful substances that could damage tools.
6. Periodically check if the pressure regulator is set at 90 psi (6,3 bar) with the
tool turned.
7. Clean the wrench after use with a mild detergent on a moist cloth.
8. When not in use, disconnect from the air supply, store in a safe, dry, childproof
location.