13
Do not allow the cable to become knotted or kinked.
Place the battery pack into the charger base. (Note the battery has raised ribs
which allows it to fit into the charger only one way). Time the charge for 60
minutes only.
The red LED on the front right hand side of the charger will illuminate to
indicate charging is in progress. A green LED will illuminate when the battery
is fully charged.
Unplug the charger when not in use and store it in a suitable storage cabinet.
Avoid charging your battery in freezing conditions as charging power will not
be sufficient.
When charging more than one battery pack in succession allow at least 30
minutes for the charger to cool down before charging an additional battery.
Always remove the battery pack and store it safety when the tool is not in use.
Caution: If at any point during the charging process none of the LEDs are lit,
remove the battery pack from the charger to avoid damaging the product. DO
NOT insert another battery.
CHARGE STATUS
To display the amount of charge left in the battery, press the charge level
indicator button (
Fig 2
).
Charge level indicator
Amount of charge remaining
0-10%