CHECK DAMAGED PARTS.
Before using any tool, any parts that appears damaged
should be carefully checked to determine that it would operate properly and perform its
intended function. Check for binding of moving parts and any other condition that may affect
proper operation. Ant part that is damaged should be properly repaired it replaced. Do not use
the tool of the switch does not turn it on and off properly.
REPLACEMENT PARTS AND ACCESSORIES.
When serving, use only identical
replacement parts. Use of any other parts will void the warranty. Only use parts intended for
use with this tool.
DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS.
Read warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs, If there is any doubt, do not operate the tool.
KEEP AWAY FORM LIQUIDS.
Tool is designed for dry sharpening operations only.
BE CAREFUL OF BITS WHEN SHARPENING.
Bits will become hot. Be careful when
Handling; allow tips to cool for some time before storing.
SHARPENING HEAD MAY BECOME HOT WHILE USING.
This is a normal
condition and no cause for alarm. Be careful when handling after use.
GROUNDING INSTRUCTIONS.
This machine is double insulated and does not require
grounding. This machine has a polarized two-pronged plug, one prong is larger than the other
prong. Do not attempt to modify the plug in any way. Modifying the plug will result in a safety
hazard and will void the warranty.
SHARPEN ONLY TWIST-TYPE BITS.
Do not sharpen masonry bits and some types of
wood bits with this machine.
SHARPENING OPERATIONS
Properly Sharpened Bits
Your bit is properly sharpened when it has the following characteristics:
1. A sharp point in the center of the bit.
2. Two sharp and equal cutting edges.
3. Two trailing edges that are slightly lower than the cutting edges.
