28
1. Remove protective cover(B);
2.
Open the hydraulic oil tank cap;
3.Open the hydraulic oil tank bolt
4. clean hydraulic oil tank afer drain out hydraulic oil.
5.use bolt block out the oil tank (D) , then filling the oil from (C)
Note : Do not mix hydraulic oil of different manufacturers;
6Install the protect cover
(
B
)。
Hydraulic oil type : atni-wear hydraulic oil L-HFC(water glycol)
5.4.2hydraulic oil filter
hydraulic oil filter(A) is on the top of hydraulic oil tank
The following rule should observed when check or mainten the juik fliter
1 open the cover of the fliter
2 uninstall the spring(C)
D
C