Neilsen CT2283, Оригинальное руководство пользователя

Страница: 8 / 12

6. MAINTENANCE
WARNING: Disconnect wrench from air supply before changing accessories,
servicing or performing maintenance. Replace or repair damaged parts. Use
genuine parts only. Non-authorised parts may be dangerous.
1.
Lubricate the air wrench daily with a few drops of air tool oil dripped into the
air inlet
2.
DO NOT use worn or damaged sockets.
3.
Loss of power or erratic action may be due to the following:

Excessive drain on the air line.

Moisture or restriction in the air pipe.

Incorrect size or type of hose connectors.
To remedy check the air supply and follow instructions.
4.
Grit or gum deposits in the ratchet wrench may also reduce
performance. If your model has an air strainer (located in the area of
the air inlet), remove the strainer and clean it.
5.
When not in use, disconnect from air supply, clean air ratchet wrench
and store in a safe, dry, childproof location.
7. DISPOSAL
At the end of the machine's working life, or when it can no longer be repaired,
ensure that it is disposed of according to national regulations.
Contact your local authority for details of collection schemes in your area.
In all circumstances:
Do not dispose of this tool with domestic waste.
Do not incinerate.
During decommissioning of the equipment, certain hazards should be
understood and avoided:
. Only with the line pressure released shall the equipment be
disassembled.
.Goggles should be worn.