Neilsen CT2214, Инструкция по эксплуатации

Страница: 12 / 20

10
3. Insert tow hitch studs at each end of the hitch rod and through hitch support
hole (left and right) at the bottom of the hopper.
Secure using M6 lock nut
(Pics.9&10).
NOTE: Hitch studs should not be screwed too tight, they need to be able to rotate freely.
STEP 5: Attach the Control Handle
1. Remove the M6 lock nut on the upper left of the hopper (Pic.11)
2. Insert the original bolts through the support rod, wheel assembly bracket and
control handle and loosely secure together using a M6 lock nut.
3. Insert the M6x16 hex bolt through the hole on the hitch plate and hole on the
support rod and loosely secure using a M6 lock nut.
4. Use a M8x20 hex bolt to attach the control handle and wheel assembly
bracket together and loosely tight with a M8 lock nut (Pics.11&12).