- 12 -
WARNING
Improper maintenance and storage of the aerator spreader may void your warranty.
MAINTENANCE
Rinse/dry inside and outside of the aerator spreader after each use.
Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE 25 PSI.
Regularly grease axle and wheel bearing area or when needed.
Periodically check all fasteners for tightness.
Annually clean and lightly lubricate
spike assembly and shaft or when needed.
Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
Spikes periodically need to be sharpened with a small grinder to maintain good
penetration.
Never exceed load capacity rating of 175lbs it will damage the equipment..
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer
’s specifications. Replacement
parts that do not meet specifications may result in a safety hazard or poor operations.
STORAGE
Never allow material to be stored in the hopper for extended periods of time.
Before storing make sure the aerator spreader is clean and dry for years of trouble free
service.
Lightly lubricate all metal surfaces and moving parts to prevent rust.
Store indoors or protected area during severe weather and winter months.
Maintenance and Storage
