Neilsen CT1912, Оригинальное руководство пользователя

Страница: 8 / 12

INSTALLING THE SANDING PAD
1. Disconnect the air hose from the tool.
2. Select the appropriate Sanding Pad (not included), and press it onto the
Backing Pad. Firmly press the Sanding Pad onto the Backing Pad, making
certain it is securely in place. Failure to properly secure the Sanding Pad may
cause the Sanding Pad to come loose, possibly causing personal injury or
property damage.
INSTALLING THE BACKING PAD
1. Disconnect tool from air supply.
2. Slide Wrench under Cover and onto the Arbor. Holding the wrench firmly, rotate
Arbor counterclockwise to remove.
3. To replace the Backing Pad, place wrench onto Arbor and hold firmly.
4. Place Backing Pad onto Arbor and turn clockwise to attach. Hand tighten firmly.
OPERATION
1. Turn the air compressor (not included) on and allow the air tank to come up to
pressure. Set the compressor output regulator to no more than 90 PSI.
2. Attach the air supply hose (not included) to the tool.
3. Grip the base of the tool in one hand. The Trigger will be under your palm.
Squeeze the tool to depress the Trigger and the tool will operate.
4. Place the tool on the work surface to begin sanding.
5. To stop sanding, lift the tool from the work surface, and relax your grip to allow
the Trigger to lift into the OFF position.
6. When you finish working, disconnect the air pressure hose from the tool and
turn off the air compressor.