Figure 3
4.
To release the material that has been picked
up by the Magnetic Sweeper, place Housing
(1) over a trash can or desired debris des-
tination. Pull up on the Housing Handle as
shown in
Figure 3
, above.
please note:
Move the Sweeper away from
the debris before releasing the Housing
Handle or it will pick up the debris again.
cleanIng and maIntenance
BeFore each use,
1.
inspect the general
condition of the Floor Sweeper. Check for
loose screws, misalignment or binding of
moving parts, cracked or broken parts and
any other condition that may affect its safe
operation.
aFter use,
2.
clean external surfaces of the
Sweeper with clean cloth.
record serial number here:
note:
If product has no serial number, record
month and year of purchase instead.
note:
Some parts are listed and shown for illustra-
tion purposes only, and are not available
individually as replacement parts.
please read the FollowIng careFullY
THE MANUFACTURER AND/oR DISTRIBUToR HAS PRovIDED
THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS DoCUMENT
AS A REFERENCE TooL oNLy. NEITHER THE MANUFACTURER
oR DISTRIBUToR MAKES ANy REPRESENTATIoN oR WARRANTy
oF ANy KIND To THE BUyER THAT HE oR SHE IS qUALIFIED To
MAKE ANy REPAIRS To THE PRoDUCT, oR THAT HE oR SHE
IS qUALIFIED To REPLACE ANy PARTS oF THE PRoDUCT. IN
FACT, THE MANUFACTURER AND/oR DISTRIBUToR ExPRESSLy
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHoULD
BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS,
AND NoT By THE BUyER. THE BUyER ASSUMES ALL RISK AND
LIABILITy ARISING oUT oF HIS oR HER REPAIRS To THE oRIGINAL
PRoDUCT oR REPLACEMENT PARTS THERETo, oR ARISING
oUT oF HIS oR HER INSTALLATIoN oF REPLACEMENT PARTS
THERETo.
part
description
Qty.
1
Housing
1
2
Wheel
2
3
Handle
1
4
Bolt/Washer
2 sets
5
Handle Base
1
6
Housing Handle
1
7
Pan Head Bolt
1
parts lIst & assemBlY
dIagram
5
7
6
