Neilsen CT1842, Оригинальная инструкция

Страница: 4 / 12

1. TECHNICAL SPECIFICATIONS
2. IMPORTANT SAFETY INFORMATION
Electrical safety
Warning! When using electric tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury. Read all these
instructions before attempting to operate this product and save these instructions.
Always check the mains voltage corresponds to the voltage on the rating
plate.
Replacing cable or plugs
Immediately throw away old cables or plugs when they have been replaced by new
ones. It is dangerous to insert the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the power input of the machine.
The minimum conductor size is 1.5mm
2 . When using a cable reel always unwind the
reel completely.
SPECIFIC SAFETY RULES
1. work area
a. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power tools create sparks which may ignite the
dust of fumes.
c. Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
Voltage : 230-240V~
Frequency : 50Hz
Intermittent service : 12s/48s
Type of protection :
Ⅱ
Temperature on soldering tip : Area A 70-200
℃
（
Adjustable
）
Area B 200-350
℃
Area C 350-500
℃