TOOL USE AND CARE
1.Do not force the tool. Use the correct tool for the application. The correct tool will
do the job better and safer at the rate for which the tool is designed.
2.Disconnect the tool from the air source before making any adjustments,changing
accessories, or storing the tool. Such preventive safety measures reduce the risk
of starting the tool unintentionally.
3. Store the tool when it is idle out of reach of children and other untrained
persons. A tool is dangerous in the hands of untrained users.
4.Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that affects the tool
’
s operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
There is a risk of bursting if the tool is damaged.
5. Use only accessories that are identified by the manufacturer for the specific tool
model. Use of an accessory not intended for use with the specific tool model,
increases the risk of injury to persons.
SERVICE
1.Tool service must be performed only by qualified repair personnel.
2.When servicing a tool, use only identical replacement parts. Use only
authorized parts.
3.Use only the lubricants supplied with the tool or specified by the manufacturer.
AIR SOURCE
WARNING
●Never connect to an air source that is capable of exceeding 250 psi. Over
pressurizing the tool may cause bursting, abnormal operation, breakage of the
tool or serious injury to persons. Use only clean, dry, regulated compressed air at
the rated pressure or within the rated pressure range as marked on the tool.
Always verify prior to using the tool that the air source has been adjusted to the
rated air pressure or within the rated air-pressure range.
●Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an
air source for the tool. Such gases are capable of explosion and serious injury to
persons.
SPECIFICATIONS
MODEL
HOSE
LENGTH
WORKING
PRESSURE
AIR HOSE SIZE
CT1535
50FEET
300psi
1/2”
