Neilsen CT1084, Оригинальное руководство пользователя, Страница: 5 / 12

4
accidentally.
5. Store idle tools out of reach of children and other untrained
persons. Tools are dangerous in the hands of untrained users.
6. Maintain tools with care. Do not use a damaged tool. Tag damaged
tools “Do not use” until repaired.
7. Check for misalignment or binding of moving parts, breakage of
parts, damaged air hose (not included), and any other condition that
may affect the tool’s operation. If damaged, have the tool serviced
before using. Many accidents are caused by poorly maintained tools.
8. Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one tool may
become hazardous when used on another tool.
SERVICE
1. Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in
a risk of injury.
2. When servicing a tool, use only identical replacement parts.
Follow instructions in the “Inspection, Maintenance, And Cleaning”
section of this manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Die Grinder. These carry
important information. If unreadable or missing, contact NEILSENTools for
a replacement.
2. To avoid accidental injury, always wear ANSI approved safety
glasses, a full face shield, and hearing protection when operating the
Die Grinder.
3. Use clean, dry, regulated, compressed air at 90 PSI. Do not exceed
the recommended 90 PSI. Never use oxygen, carbon dioxide, combustible
gases, or any other bottled gas as a power source for this tool.
4. When connecting to the air supply: Prior to each use, if an automatic
oiler is not used, add two drops of air tool oil (not included) into the Air Inlet