Neilsen CAR2K, Инструкция по эксплуатации

Страница: 19 / 24

Caution: The inverter is engineered to be connected directly to standard
electrical and electronic equipments. Do not connect the power inverter to
household or RV AC distribution wiring.Do not connect the power inverter to any
AC load circuit in which the neutral conductor is connected to ground(earth) or to
the negative of the battery source.
Warning: Do not connect to AC distribution wiring.
Operating Tips
Rated versus actual current draw of equipment
Most electrical tools, appliances and audio/video equipment have labels that
indicate the power consumption in amps or watts. Be sure that the power
consumption of the item you wish to operate is less than inverter’s rating
power.( if the power consumption is rated in amps, simply multiply by the AC
volts( 220-240V) to determine the wattage). The inverter will shutdown if it is
overloaded. To overload must be removed before the inverter will restart.
Resistive loads are the easiest for the inverter to run. However, larger resistive
loads, such as electric stoves or heaters, usually require more wattage than the
inverter can deliver. Inductive loads, such as TV’s and stereos, require more
current to operate than do resistive loads of the same wattage rating. Induction
motors, as well as some televisions, may require 2 to 6 times their wattage rating
to start up. The most demanding in this category are those that start under load,
such as compressors and pumps. To restart the unit after a shutdown due to
overloading, remove the overload if necessary turn the power switch OFF then
ON.