neighbor Haven 8-Piece U Sectional Teak Arm, Инструкция по сборке

Страница: 5 / 44

Components Assembly Instructions Contact 0 5
Assembly Tips
Exercise caution while lifting
Two-person lift is recommended. Both the
boxes and the product itself are large and heavy
and awkward to lift alone.
Lay everything out before you begin
Spreading out all of the components prior to
assembling them will help you find the parts
you are looking for and will make for a faster
and easier assembly process!
Assemble on a soft surface
We recommend assembling your furniture on a
soft surface such as a rug(s) or a towel(s). The wood
frame can scratch easily if accidentally rubbed
against harsh textures like brick or concrete.
Loose first, then tight
Do not fully tighten hex bolts when assembling.
Insert them loosely first. After the modules are
fully assembled, then tighten the bolts firmly.
Differing humidity levels can slightly affect how
the pieces fit together and this strategy should
alleviate that.
Product Care
Caring for teak
Unfinished teak will gradually change color
from a honey gold to a silver-grey patina.
We encourage allowing the teak to turn color
naturally and cleaning it annually or bi-annually.
As for cleaning, we recommend Golden Teak
Cleaner, which is specifically designed to kill
mould and mildew spores inside teak.
Avoid prolonging mildew growth. If left in the
shade for extended periods of time, this can be
common.
Covering your furniture for extended periods of
time, especially if enduring consistent inclement
weather will greatly prolong the lifespan of the
wood.
Caring for cushion cover fabric
One of the best ways to keep your Sunbrella
fabric looking good is to brush off dirt before
it becomes embedded in the fabrics and wipe
up spills or clean soon after a stain occurs. The
quicker you clean spills and stains, the easier
they can be to remove.
When removing stains, typically these are the
steps you should try:
• Blot (don’t rub) liquid spills with a clean, dry
cloth. For oil-based spills, apply an absorbent
such as corn starch, then remove with a
straight edge.
• Spray on a mild cleaning solution of soap
(such as Woolite® or Dawn®) and water.
• Rinse the fabric thoroughly to remove all
soap residue.
• Air dry.
Avoid scrubbing, hard bristle brushes or any
other abrasive cleaning method.
Sunbrella should only be allowed to air dry.
Protect the area around your Sunbrella fabric
when using bleach or other chemical solvents
that may discolor non-Sunbrella fabrics. Always
rinse Sunbrella thoroughly.
Bleach can have harmful effects on the natural
environment around you. Please follow all safety
and environmental precautions according to the
bleach label.
If fabric has some wrinkling, use an iron on the
synthetic setting. As iron temperatures may
vary, first test a small inconspicuous area before
ironing the entire piece.
DO NOT use a steamer or an iron set to the
steam setting.