•
Open the battery cover on the back of the remote controller.
•
Insert 2*AAA batteries in accordance with the instructions on the battery box.
(Battery should be purchased separately, old and new or different types of batteries shouldn’t be mixed.)
A
A
One Key Return
(One Key Come Back)
3D Roll
Headless Mode
Take Photo
Record Video
Right Joystick
Press down to hear the
tone can be fine-tuning
left and right, fine-tuning
up and down
One Key Start / Landing
Emergency Stop
*Open the right arm to turn
on the transmitter
1. RECHARGING:
While battery is charging, LED light on USB is on; When fully charged, LED light goes off.
The whole recharge time will be around 60 minutes.
2. SAFETY:
Different types of batteries or old and new batteries should not be mixed.
• Only use the provided charger line to charge.
• Follow the polarity correctly installed batteries power
and ensure terminals shall not be short-circuited.
• Rechargeable batteries can only be charged under the
supervision of the adult.
• Do not use rechargeable battery overcharging.
• Exhausted batteries should be taken out of the remote control.
• Use batteries according to the environmental protection agency.
NOTE: The right arm of the transmitter is Power ON / OFF
.
By extending the right arm, the controller
will automatically Power ON and make a beep sound. The Power Indicator will turn ON. Also, closing
the right controller arm will turn off the controller.
TRANSMITTER
ASSEMBLED REMOTE CONTROLLER
BATTERY INSTRUCTIONS
Speed
Left Joystick
(Up / down left / right turn)