NEFF W726UT0ES, Руководство пользователя

Страница: 49 / 60

Troubleshooting
en
49
Fault Cause troubleshooting
The water is not draining. Drain pump is blocked.
▶
→
"Cleaning the drain pump",
Page 41
– – – – is activated.
▶
Continue the programme by select-
ing or
and pressing Inicio
Pausa+Carga .
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 37
The water outlet hose is con-
nected too high.
▶
Install the water outlet hose at a
maximum height of 1 metre.
→
"Technical specifications",
Page 58
Water is not flowing in. De-
tergent is not being dis-
pensed. You have not pressed Inicio
Pausa+Carga .
▶
Press Inicio Pausa+Carga .
The filter in the water inflow
is blocked.
▶
"Clean the water inflow filter"
→
Page 44 .
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
The spin cycle runs several
times. The unbalanced load detec-
tion system eliminates an im-
balance by repeatedly redis-
tributing the laundry.
▶
Not a fault – no action required.
Note: When loading, where possible,
place large and small items of laundry
together in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
The programme duration
changes during the wash
cycle. The programme operation is
optimised electronically.
This may change the pro-
gramme duration.
▶
Not a fault – no action required.
The unbalanced load detec-
tion system eliminates an im-
balance by repeatedly redis-
tributing the laundry.
▶
Not a fault – no action required.
Note: When loading, where possible,
place large and small items of laundry
together in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
Foam detection system
switches on a rinse cycle if
foam build-up is too high.
▶
Not a fault – no action required.
No water is visible in the
drum. Water is below the visible
area.
▶
Not a fault – no action required.