Time-setting options
en
13
Button
Default value
10 minutes
30 minutes
The cooking time can be set in 1-minute increments
up to 1 hour, and then in 5-minute increments.
a
The appliance starts heating and the cooking time
counts down after a few seconds.
a
If the cooking time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
3.
When the cooking time has elapsed:
‒
Press any button to end the audible signal before
it sounds.
‒
To set a cooking time again, press the button.
‒
When your food is ready, switch off the appli-
ance.
Changing the cooking time
You can change the cooking time at any time.
Requirement:
is highlighted on the display.
▶
Change the cooking time using the or button.
a
The appliance applies the change after a few
seconds.
Cancelling the cooking time
You can cancel the cooking time at any time.
Requirement:
is highlighted on the display.
▶
Reset the cooking time to zero using the button.
a
After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
8.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡
The end time cannot be set for types of heating with
grill function.
¡
In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡
Food will spoil if you leave it in the cooking com-
partment too long.
Requirements
¡
The type of heating and temperature or setting are
set.
¡
A cooking time is set.
¡
Operation with the meat probe has not been set.
¡
Operation with Sabbath mode has not been set.
1.
Press the button repeatedly until the symbol for
the oven being switched on and the
symbol are
highlighted.
2.
Press the or button.
a
The display shows the calculated end time.
3.
Use the or button to delay the end time.
a
After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a
Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a
Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
4.
When the cooking time has elapsed:
‒
Press any button to end the signal prematurely.
‒
To set another cooking time, press the button.
‒
When your food is ready, switch off the appli-
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
is highlighted on the display.
▶
Use the or button to delay the end time.
a
The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end at any time.
Requirement:
is highlighted on the display.
▶
Reset the end time to the current time plus the set
cooking time using the button.
a
After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:
The function selector must be set to the
"Off" position .
1.
Use the or button to set the time.
2.
Press the button.
a
The time that is set appears on the display.
Tip:
You can go to the basic settings
to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement:
The function selector must be set to the
"Off" position .
1.
Press the button repeatedly until is highlighted
in the display.
2.
Use the or button to change the time.
a
The appliance applies the change after a few
seconds.
