en
Hob-based hood control
20
23 Hob-based hood control
If both appliances are Home Connect-compatible, con-
nect the appliances in the Home Connect app. To do
this, connect the two appliances to Home Connect and
follow the instructions in the app.
Notes
¡
Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based
hood control during this time.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
¡
You can only connect to the extractor hood via the
Home Connect app. Other connection routes are no
longer supported.
23.1 Resetting Home Connect settings
If you have problems connecting your appliance to the
WLAN home network (Wi-Fi) or if you want to log your
appliance onto a different WLAN home network (Wi-Fi) ,
you can reset the Home Connect settings.
Note:
If you reset the Home Connect settings, the con-
nection to any extractor hood will also be terminated.
1.
Press and hold for 4 seconds.
a
The display will show the product information.
2.
Touch repeatedly until the display alternately
shows and .
3.
Use the twist knob to set the value to .
23.2 Controlling the extractor hood via the
hob
You can change the behaviour of your extractor hood
in the basic settings of your hob, depending on switch-
on/off of the hob or individual cooking zones.
You can select other settings using the controls on the
hob.
Setting the fan
1.
Touch .
2.
Use the twist knob to select a fan setting.
You can choose between the levels 1, 2 and 3.
To select an intensive setting, turn the twist knob un-
til or appears.
Switching off the fan
▶
Use the twist knob to select the fan setting 0.
Switching on automatic mode
1.
Touch .
2.
Turn the twist knob until the display shows .
a
The fan will start automatically when steam is pro-
duced.
Switching off automatic mode
1.
Touch .
2.
Use the twist knob to select the fan setting 0.
3.
Automatic mode will also end if you select a differ-
ent fan setting.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
1.
To switch the lighting on, touch .
2.
To switch the lighting off, touch again.
23.3 Overview of the hood control settings
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob
or individual cooking zones are switched on or off.
Setting
Selection
Description
Connection between hob and extractor hood
– Not connected/disconnected
– No function
– Connected to WLAN home network (Wi-Fi)
– Connected to WLAN and extractor hood
-
Automatic fan start-up
– Switched off. The extractor hood must be
switched on manually, if required.
– Switched on in automatic mode
1
. In automatic
mode, the extractor hood switches itself on when
one of the cooking zones is switched on.
– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
1
Factory setting (may vary according to model)
Содержание T68TS6RN0/48
Страница 1: ...Induction hob en Information for Use T68 S6...
Страница 26: ......
Страница 27: ......
