NEFF T5 L6E Series, Инструкция по эксплуатации

Страница: 18 / 52

en
Operating the appliance
18
Manual hood control
You can control the ventilation setting manually.
Note:
Using tall items of cookware may prevent the
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on
the cookware at an angle.
Activation
1.
Touch the
A
symbol.
The ventilation system starts at the preset power
level.
2.
Within the next 10 seconds, use the twist knob to
select the required power level.
The selected power level lights up.
3.
Touch the
A
symbol to confirm the selected setting.
The ventilation system switched on.
Changing and switching off
Touch the
A
symbol and select the required power
level or use the twist knob to set
‹
.
Intensive setting
There are two intensive modes for the ventilation
system. If you activate the intensive settings, the
ventilation system works at maximum output for a short
time.
Activation
Touch the
A
symbol and select the required intensive
setting.
■
Intensive setting I
: Turn the twist knob until the
˜
display on the
A
symbol lights up. The intensive
setting is activated.
■
Intensive mode II
: Turn the twist knob until the
˜ .
display on the
A
symbol lights up. The intensive
setting is activated.
Note:
After eight minutes, the appliance automatically
switches back to fan setting
Š
.
Changing and switching off
Touch the
A
symbol and select the required power
level or use the twist knob to set
‹
.
Automatic start
If you select a power level for a cooking zone, the
automatic start switches on.
The hob comes with sensor-controlled automatic start
as standard. You can find out how to change this
setting in section
~
"Basic settings" .
Automatic start with sensor control
The air quality sensor automatically registers the
cooking vapours, selects the optimum power level and
lights up the
‘
display.
Automatic start via power levels
The ventilation system switches on at a power level in
accordance with the respective power level for the
cooking zone.
Automatic mode with sensor control
The hob has an air quality sensor that automatically
registers the cooking vapours and switches on the
ventilation system.
If the automatic start is switched off or is set in
accordance with the power levels, you can switch on
operation with sensor control manually at any time.
Activation
Turn the twist knob until the indicator
‘
on the
A
symbol lights up. The optimum performance level is set
automatically using a sensor.
Deactivating
Touch the
A
symbol.
Use the twist knob to select another the power level.
The
‘
display goes out. The sensor control is switched
off.
Note:
You can find out how to set the sensor sensitivity
in section
~
"Basic settings" .
Run-on function
The run-on function allows the ventilation system to
continue operating for a few minutes after the hob has
been switched off. This removes any remaining cooking
vapours. The ventilation system then automatically
switches off.
The hob is supplied as standard with the run-on time
with a maximum switch-off time. You can find out how to
change this setting in section
~
"Basic settings" .
Activation
The run-on time mode is possible in accordance with
the configured basic settings are:
■
Via the control for the air quality sensor. The
‘
symbol lights up.
■
With a maximum switch-off time. The
b
display lights
up above the
A
symbol.
Note:
The run-on function only switches on if at least
one cooking zone has been switched on for at least one
minute.
Deactivating
Manual
Touch the
A
symbol. The run-on function is switched
off.
Automatic
The run-on function is switched off in the following
cases:
■
The run-on time has elapsed.
■
The appliance is switched on again.
■
The sensor ensures that the air quality is in order.