en
Cookware test
10
Display
Setting
Value
Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob. You can find precise information on the
rating plate. If the function is active and the
hob has reached the set power limit, is dis-
played and you cannot select a higher power
level.
- Switched off. Maximum power of the hob
1
.
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W. Recommended for 13 A.
. - 3500 W. Recommended for 16 A.
- 4000 W.
. - 4500 W. Recommended for 20 A.
...
- Maximum power of the hob.
Time for selecting the cooking zone
- Unlimited: You can adjust the last selected cooking
zone without having to select it again.
1
– Limited: You can adjust the last selected cooking
zone within 10 seconds after selecting it. After this time,
you must select the cooking zone again before adjusting
it.
Cookware test
You can use this function to test the quality
of the cookware.
- Not suitable.
- Not optimal.
- Suitable.
Automatic management with power limitation
- Deactivated: Does not show the power limit unless
is activated.
1
- Switched on: Always displays the power limit.
Restoring factory settings
- Individual settings
1
.
- Factory settings.
1
Factory setting
10.2 To go to the basic settings
Requirement:
The hob must be switched off.
1.
To switch on the hob, touch .
2.
Within the next 10 seconds, press and hold
for
four seconds.
Product information
Display
Directory for the technical after-sales
service (TK)
Production number
Production number 1
.
Production number 2
.
a
The first four displays provide the product informa-
tion. Touch or to view the individual displays.
3.
Touch
to access the basic settings.
a
and light up alternately as well as as a preset
value.
4.
Touch
repeatedly until the desired setting ap-
pears.
5.
Use or to select the required value.
6.
Touch and hold
for four seconds.
a
The settings are saved.
10.3 Exiting the basic settings
▶
To exit the basic settings and and switch off the
hob, touch .
11 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. →
11.1 Carrying out Cookware test
1.
At room temperature, place the cookware with ap-
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2.
Call up the basic settings and select .
3.
Touch or . The display flashes in the cooking
zones.
a
The function has been activated.
a
After 20 seconds, the result appears in the cooking
zone displays.
11.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
Содержание T3 B40 Series
Страница 1: ...Induction hob en User manual 2 T3 B40...
Страница 15: ......
