NEFF T3 B4 Series, Инструкция по эксплуатации

Страница: 14 / 24

en
PowerBoost function
14
v
PowerBoost function
PowerBoost function
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat
setting Š .
The function can be used by any hotplate provided that
no other hotplates are switched on. Otherwise
›
and
Š
will flash in the heat setting display.
To activate
1.
Select a hotplate.
2.
Press the › symbol.
The › indicator lights up.
The function should be activated.
Note:
If a hotplate is switched on while the PowerBoost
function is active, › and Š will flash on the heat setting
display; heat setting Š will then be applied
automatically. The PowerBoost function will now be
deactivated.
Deactivating
1.
Select a hotplate.
2.
Touch the › symbol.
The › display goes out and the hotplate switches
back to the Š heat setting.
The function was deactivated.
Note:
In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
A
Childproof lock
Childproof lock
You can use the childproof lock to prevent children
from switching on the hob.
Activating and deactivating the childproof
lock
The hob must be switched off.
To activate: Touch the
‚
symbol for approx. 4
seconds. The indicator next to the
‚
symbol lights up
for 10 seconds. The hob is locked.
To deactivate: Touch the
‚ symbol for approx. 4
seconds. The lock is released.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the
~
"Basic settings" section
b
Automatic safety cut-out
Automatic safety cut-out
If a hotplate operates for an extended period and no
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
”
,
‰
and the residual heat
indicator
œ
or
•
flash alternately in the hotplate display.
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours).