NEFF T18 T16 Series, Инструкция по эксплуатации

Страница: 39 / 60

Keep warm function
en
39
z
Keep warm function
Keep warm function
The Keep warm function is suitable for melting
chocolate or butter and for warming food and cookware
Switching on the Keep warm function
1.
Select the hotplate.
2.
Touch the – symbol. – lights up on the heat setting
display.
The Keep warm function is switched on.
Switching off the Keep warm function
1.
Select the hotplate.
2.
Touch the – symbol. ‹ lights up on the heat setting
display.
The Keep warm function is switched off.
[
Energy consumption
indicator
Energy consumption indicator
You can use this function to have the total energy
consumption between switching the hob on and off
displayed.
Once switched off, the consumption in kilowatt hours
(e.g. 1.87 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.
~
Page 39
Q
Basic settings
Basic settings
Your appliance has various basic settings. You can
adapt these settings to suit your own needs.
Display
screen
Function
™‚
Automatic childproof lock
‹
Switched off.*
‚
Switched on.
ƒ
Manual and automatic childproof lock switched off.
™ƒ
Audible signal
‹
Confirmation signal and operation error signal are
switched off (main switch signal always remains).
‚
Only the operation error signal is switched on.
ƒ
Only the confirmation signal is switched on.
„
Confirmation signal and operation error signal switched
on.*
™„
Energy consumption display (Ask your electricity
supply company what the mains voltage is)
‹
Consumption display switched off.*
‚
Consumption display with mains voltage at 230 V.
ƒ
Consumption display with mains voltage at 400 V.
„
Consumption display with mains voltage at 220 V.
…
Consumption display with mains voltage at 240 V.
™†
Automatic timer
‹‹
Switched off.*
‹‚ - ŠŠ
Cooking time, after which the hotplates switch off.
™‡
Duration of the timer end signal
‚
10 seconds.
ƒ
30 seconds
„
1 minute.*
™ˆ
Activation of the heating elements
‹
Switched off.*
‚
Switched on.
ƒ
Last setting before the hotplate was switched off.
™Š
Time for selecting the hotplate
‹
Unlimited: The last selected hotplate can always be
adjusted without having to select it again.*
‚
Once you select a hotplate, you have 10 seconds to adjust
it: After this you will have to select it again in order to be
able to adjust it.
™‹ Reset the basic settings
‹ Switched off.*
‚ Switched on.
*Basic setting