NEFF T....5 series, Инструкция по эксплуатации

Страница: 27 / 48

27
Changing or cancelling the time
select the hotplate using the Tipp control. Press the 3 symbol
and change the cooking time using the Tipp control, or set
to ‹‹ .
Once the time has elapsed
The plate is turned off. The warning signal sounds, the hotplate
displays
‹
and the time program function screen displays
‹‹
for one minute. The
x
indicator of the hotplate flashes.
Pressing any symbol turns off the indicators and stops the
beep.
Notes
■
If cooking times have been programmed for various plates,
the time program function displays the shortest cooking time.
The
x
indicator of the hotplate lights up.
■
To check the remaining cooking time of a hotplate: select the
hotplate using the Tipp control. The cooking time will be
displayed for five seconds.
■
Cooking time can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
No hotplate should be selected.
1.
Press on the
3
symbol, and the time program function
display shows
‹‹
.
2.
Select the required time using the Tipp control.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the 3 symbol and change the time using the Tipp
control, or set to ‹‹ .
Once the time has elapsed
A warning beep sounds. The time program function displays
‹‹
and the indicator
V
comes on. Pressing any symbol turns
off the indicators and stops the beeping.
Keep warm function
This function is used for melting chocolate or butter and for
keeping food warm.
To activate
1.
Select the required hotplate using the Tipp control.
2.
Within the next 5 seconds, press the
–
symbol.
The
–
indicator lights up.
The "keep warm" function has been turned on.
To turn off
1.
Select the required hotplate using the Tipp control.
2.
Press the
–
symbol.
The
–
display turns off.
After five seconds, the hotplate turns off and the residual heat
indicator appears.
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Remove the Tipp control. A signal sounds and the " indicator
lights up. The control panel is locked for 35 seconds. The
surface of the control panel can now be cleaned without risk of
changing the settings.
Note:
The lock does not affect the main switch. The hob may
be turned off when desired.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
” and ‰
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).