NEFF S517T80D0G, Инструкция по эксплуатации

Страница: 16 / 56

en
Water softening system/special salt
16
Top up the salt as follows:
1.
Undo the screw plug on the
dispenser
1b
.
2.
Fill the dispenser with water
(required only when switching on the
appliance for the first time).
3.
Add salt as illustrated
(do not use
table salt or tablets)
.
The water is displaced and runs out.
* depending on the features of your
dishwasher
Using detergents with salt
component
Detergent with a salt component
If combined detergents with a salt
component are used, special salt can
usually be omitted up to a water
hardness of 21° dH (37° fH,
26° Clarke, 3.7 mmol/l). If the water
hardness is over 21° dH, salt must be
used.
Switching off low salt
indicator / water softening
system
Switching off water softening system
If the use of combined detergents with
a salt component impairs the low salt
indicator
P
on the control panel or
the text on the display window at the
top
@
(enough salt for x rinse cycles),
the displays can be switched off.
Proceed as described under “Setting
water softening system” and set the
value to
0-8
. The water softening system
and salt refill indicator are now switched
off.
*