NEFF S353ITX02G, Руководство пользователя

Страница: 32 / 52

en
Basic settings
32
Basic settings
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Selection Description
Water hardness Scale with 4 levels Set the water hardness.
→
"Setting the water softening
system", Page 22
Rinse aid disp. Scale with 4 levels Set the amount of rinse aid to
be dispensed or switch off.
→
"Setting the amount of rinse
aid", Page 24
Extra Dry On
Off
1
Switch Extra Dry on or off for
each operation.
For a better drying result the
temperature in the final rinse is
increased. This may increase
the running time slightly.
Note: Please take care with del-
icate tableware.
→
"Setting Extra Dry",
Page 32
Tone volume Scale with 4 levels Adjustment of tone volume.
→ "Setting signal volume",
Page 33
Factory setting Reset Restore changed settings to the
factory settings.
The settings for initial start-up
must be configured.
→ "Restoring factory settings",
Page 33
1
Factory setting (may vary according to model)
Setting Extra Dry
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a is flashing on the display.
3.
Press repeatedly until
and flash in the display.
4.
Press repeatedly until the
LEDs show the right value.
If "LED A" →
Page 15 is not lit, Ex-
tra Dry is switched off.
If "LED A" →
Page 15 is lit, Extra
Dry is switched on.
5.
To save the settings, press
for 3 seconds.