NEFF S187TC800E, Инструкция по эксплуатации

Страница: 49 / 68

Troubleshooting
en
49
Fault Cause Troubleshooting
E:90-01 will light up altern-
ately. Mains voltage is too low. This is not a fault on the appliance.
1.
Contact an electrician.
2.
Have the mains voltage and elec-
trical installation checked by an
electrician.
E:92-40 will light up altern-
ately. Filters are soiled or blocked.
▶
Clean the filters.
→
"Cleaning filters", Page 43
A different error code ap-
pears in the display window.
E:01-00 to E:90-10 A technical fault is present.
1.
Press .
2.
Unplug the appliance or switch off
the fuse.
3.
Wait at least 2 minutes.
4.
Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press ⁠.
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact "Customer Service"
→
Page 61 and give the er-
ror code.
Washing results
Fault Cause Troubleshooting
Tableware is not dry. No rinse aid used or dosage
set too low.
1.
Add "Rinse aid" → Page 28 .
2.
Set the amount of rinse aid to be
dispensed.
→
"Setting the amount of rinse aid",
Page 28
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
▶
"Select a programme with drying,
e.g. intensive, strong or ECO pro-
gramme."
→
Page 19
Some option buttons decrease the
drying result, e.g varioSpeed.