NEFF S153HCX02G, Руководство пользователя

Страница: 36 / 60

en
Basic settings
36
Setting Extra Dry
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes in the display.
3.
Press repeatedly until
and flash in the display.
4.
Press repeatedly until the
LEDs show the right value.
If LED A →
Page 16 is not lit, Extra
Dry is switched off.
If LED A →
Page 16 is lit, Extra Dry
is switched on.
5.
To save the settings, press
for 3 seconds.
Setting signal volume
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes in the display.
3.
Press repeatedly until
and flash in the display.
4.
Press repeatedly until the
right signal volume has been set.
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 (LED
A and LED B →
Page 16 ).
5.
To save the settings, press
for 3 seconds.
Set Wi-Fi
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes in the display.
3.
Press repeatedly until
and flash in the display.
4.
Press repeatedly until the
LEDs show the right value.
If LED A → Page 16 is not lit, the
wireless network connection is
switched off.
If LED A →
Page 16 is lit, the wire-
less network connection is
switched on.
5.
To save the settings, press
for 3 seconds.
Set remote start
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a flashes in the display.
3.
Press repeatedly until
flashes in the display.
4.
Press repeatedly until the
LEDs show the right value.
If LED A is lit, remote start is per-
manently deactivated.
If LED A and B LED are lit, remote
start can be selected via the re-
mote start button.
If LED A, LED B and LED C are lit,
remote start is permanently activ-
ated.
The factory setting is level 2 (LED
A and LED B →
Page 16 ).
5.
To save the settings, press
for 3 seconds.
Restoring factory settings
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a flashes in the display.
3.
Press repeatedly until ,
and flash in the display.
4.
Press to set the appliance
back to the factory settings.
a The appliance is reset.