NEFF R8580X3GB, Руководство пользователя и инструкции по установке

Страница: 39 / 48

Troubleshooting
en
39
Fault Cause and troubleshooting
The length of the pro-
gramme changes dur-
ing the drying cycle. The programme operation is optimised electronically.
This may change the programme duration.
▶
Not a fault – no action required.
Pumping noise. Condensation pump active.
▶
Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶
Not a fault – normal operating noise.
The drying time is too
long. Fluff filter is soiled.
▶
→ "Cleaning the fluff filter", Page 29
The ambient temperature is greater than 30 °C.
▶
Ensure that the ambient temperature is below 30
°C.
The ambient temperature is lower than 15 °C.
▶
Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶
Ventilate the appliance's installation location.
The appliance's ventilation opening is blocked.
▶
Ensure that the ventilation opening of the appliance
is kept clear.
Heat exchanger is soiled.
1.
Opening the base unit.
→
"Opening the base unit", Page 33 .
2.
Cleaning the heat exchanger.
→
"Cleaning the base unit", Page 34 .
3.
Closing the base unit.
→
"Closing the base unit", Page 35 .
Water is leaking from
the appliance. Appliance is not correctly aligned.
▶
→ "Aligning the appliance", Page 16
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
→
"Connecting the water drain hose", Page 14
The laundry is too
damp. Unsuitable programme for the type of fabric.
▶
Set a timed programme for the subsequent drying.
→
"Programmes", Page 24
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.