NEFF N17XH10 0 Series, Инструкция по применению

Страница: 8 / 16

en
Drying
8
4.
Touch to select the vacuum-sealing level.
5. Touch to start the vacuum-sealing process.
a
The vacuum-sealing process starts. The vacuum-
sealing level indicators pulsate in orange one after
the other until the selected value has been reached.
a
The vacuum-sealing process can take up to
two minutes.
a
The vacuum-sealing level that has been reached
lights up and an audible signal sounds.
6. Detach the hose from the container and the external
vacuuming adaptor.
Note: If larger bubbles form, cancel the vacuum-sealing
process. → Page 8
8.2 Suitable vacuum-sealing containers
Use suitable vacuum-sealing containers in order to
achieve an optimal result.
Only use containers that
are suitable for vacuum-
sealing food.
Commercially available
products are different
when it comes to the
quality of the food and the
material.
The vacuum hose at-
tached to this appliance
has an internal diameter
of 3 mm.
You may need an adapter
for your container so that
the hose fits. These ad-
aptors are often already
included with the vacuum-
sealing containers.
8.3 Cancelling the vacuum-sealing in the
container
1. To cancel the vacuum-sealing process early, touch
⁠.
a
The appliance displays the vacuum-sealing level un-
til it is reached.
2.
Detach the hose from the container and the external
vacuuming adaptor.
9 Drying
When vacuum-sealing food, the smallest volume of wa-
ter gets into the vacuum pump system.
This effect is exacerbated when you are vacuum-seal-
ing liquids or extremely moist food. For this reason, the
appliance comes with a drying function, which further
removes any liquid that collects in the pump.
¡
If the ⁠ symbol lights up white, it is advisable to run
a drying cycle. However, at this point, you can con-
tinue to use the appliance as normal if you wish.
¡
If the ⁠ symbol lights up red, you must run a drying
cycle.
9.1 Starting drying
Note: You can close the vacuum-sealing drawer while
drying is in progress.
1. Tightly close the glass lid and hold it there.
2.
Touch ⁠.
a
The drying starts and takes between 5 and 20
minutes.
a
During the procedure, pulsates in red.
a
At the end of the process, the compartment is ventil-
ated and an audible signal sounds.
a
You can now open the glass lid.
3. Note: Occasionally, a single drying procedure is not
sufficient. If, after one drying procedure, ⁠ and
⁠ red light up, there is still moisture in the pump sys-
tem.
Wait until goes out.
4. Restart the drying process.
10 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
10.1 Cleaning products
You can obtain suitable cleaning products from after-
sales service or the online shop.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
▶
Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.
▶
Wash sponge cloths thoroughly before use.
10.2 Cleaning the appliance
WARNING ‒ Risk of burns!
The heat-sealing bar in the vacuum-sealing compart-
ment becomes extremely hot if the appliance is used
frequently and there are long heat-sealing times.
▶
Never touch the hot heat-sealing bar.
▶
Keep children at a safe distance.