NEFF N13TD20N0, Инструкция по эксплуатации

Страница: 9 / 16

Automatic safety cut-out
en
9
To switch on: Touch the
œ
symbol. The
A
display
above the
œ
symbol lights up.
‹‹
appears in the timer
display. The time measurement begins. Seconds are
displayed during the first minute, then minutes.
To switch off: Touch the
œ
symbol again. The timer
display goes out.
b
Automatic safety cut-out
Automatic safety c ut-out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
”‰ and the • / œ residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
z
Keep warm function
Keep warm function
The Keep warm function is suitable for melting
chocolate or butter and for warming food and cookware
Switching on the Keep warm function
1.
Select the hotplate.
2.
Touch the – symbol. – lights up on the heat setting
display.
The Keep warm function is switched on.
Switching off the Keep warm function
1.
Select the hotplate.
2.
Touch the – symbol. ‹ lights up on the heat setting
display.
The Keep warm function is switched off.
k
Wipe protection
Wipe prot ection
If you wipe over the control panel while the hob is
switched on, settings may be altered.
To prevent this from happening, your hob has a wipe
protection function. Touch the
z
symbol. An audible
signal sounds. The
A
display above the
z
symbol
lights up. The control panel is locked for 30 seconds.
You can now wipe over the control panel without
altering any settings.
Note:
The main switch is excluded from the wipe
protection function. You can switch off the hob at any
time.
[
Energy consumption
indicator
Energy co nsumption indicator
You can use this function to have the total energy
consumption between switching the hob on and off
displayed.
Once switched off, the consumption in kilowatt hours
(e.g. 1.87 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.
~
Page 9
Q
Basic settings
Basic set tings
Your appliance has various basic settings. You can
adapt these settings to suit your own needs.
Display
screen
Function
™‚ Automatic childproof lock
‹
Switched off.*
‚
Switched on.
ƒ
Manual and automatic childproof lock switched off.
™ƒ Audible signal
‹
Confirmation signal and operation error signal are
switched off (main switch signal always remains).
‚
Only the operation error signal is switched on.
ƒ
Only the confirmation signal is switched on.
„
Confirmation signal and operation error signal switched
on.*
™„ Energy consumption display (Ask your electricity sup-
ply company what the mains voltage is)
‹
Consumption display switched off.*
‚
Consumption display with mains voltage at 230 V.
„
Consumption display with mains voltage at 220 V.
…
Consumption display with mains voltage at 240 V.
*Basic setting
N:K
Í Í