NEFF L1542N0, Инструкция по эксплуатации и монтажу, Страница: 19 / 40

19
Connecting
the hob
Connectable built-in hobs
Cooking surface and appliance must be
from the same manufacturer and
marked with a point on the instructions
sticker. Otherwise functional failures will
result. They must have the same rated
voltage (see nameplate).
Connecting The switchbox must be installed before
connecting up the built-in hob.
Important: When connecting up the
built-in hob to the switchbox, it is
essential to follow the connecting
diagram on the appliance and the
installation instructions for the built-in
hob.
The green-yellow earth line of the
built-in hob must be connected to the
earthing screw of the built-in cooker.
If the earth line is not properly
connected, there is the danger of
electric shock.
Important: The built-in hob
connectors must be plugged into the
switchbox sockets with the same
coloured markings.
Furniture programmes Built-in cooker units from any kitchen
range can be used for the switchbox.
The veneers or plastic coating of the
units in question must have been
processed using heat-resistant
adhesive (90° C). If plastic coating or
adhesive is insufficiently temperature-
resistant, the coating may deform or
loosen.
In line with the test regulations on
heating, the appliance corresponds to
Type Y.