NEFF KI887 Series, Руководство пользователя

Страница: 32 / 72

en
Troubleshooting
32
Temperature problem
Fault Cause troubleshooting
The temperature differs
greatly from the setting. Different causes are pos-
sible.
1.
"Switch off the appliance."
→
Page 20
2.
"Switch the appliance back on after
five minutes."
→
Page 19
‒
If the temperature is too
warm, check the temperature
again after a couple of hours.
‒
If the temperature is too cold,
check the temperature again
on the following day.
Cool-fresh compartment is
too warm or cold. Standard setting is too high
or too low, e.g. frost in cool-
fresh compartment. Note: The standard setting of the cool-
fresh compartment is preset at 0. Set-
ting 0 corresponds to a temperature of
around 0 °C. You can set the temperat-
ure in the cool-fresh compartment to
3 settings warmer or colder.
A change in the standard setting will
affect the temperature in the refriger-
ator compartment and the freezer
compartment.
1.
Press until the temperature
display (refrigerator compartment)
flashes.
2.
To change the setting, press / (Re-
frigerator compartment).
– Setting –3 corresponds to the
coldest setting.
– S3 corresponds to the
warmest setting.
a The selected setting is saved after
one minute.
Noise
Fault Cause troubleshooting
Appliance has a humming
sound. Not a fault. A motor is run-
ning, e.g. refrigerating unit,
fan. No action required.
The appliance bubbles,
buzzes or gargles. Not a fault. Refrigerant flows
through the pipes. No action required.