NEFF I96CM.7N0, Инструкция по эксплуатации

Страница: 8 / 12

8
Removing metal grease filter
1.
Press the lock on the filter cover.
Note:
The filter cover is heavy. Grip the filter cover with two
hands.
2.
Open the filter cover downwards.
Note: Open the filter cover slowly and without any jerky
movements.
3.
Press the lock on the metal grease filters.
Note:
To avoid causing damage, do not bend the metal
grease filter.
4.
Take the metal grease filter out of the holder.
Note:
Fat may accumulate in the bottom of the metal grease
filter. Hold the metal grease filter level to prevent fat from
dripping out.
5.
Clean the appliance from the inside.
6.
Clean the metal grease filter and let it dry before re-fitting.
Installing the metal mesh grease filter
1.
Insert metal grease filter.
While doing this, place your other hand under the metal
grease filter.
2.
Fold up metal grease filter and engage the lock.
3.
Close the filter cover upwards.
Note:
Ensure that the filter cover lock engages correctly.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a licensed
technician (electrician).
Malfunction table
--------
Fault Possible cause Solution
The appliance does not work The plug is not plugged into the mains Connect the appliance to the power
supply
Power cut Check whether other kitchen appliances
are working
The fuse is faulty Check in the fuse box to make sure that
the fuse for the appliance is in working
order
The lighting does not work The bulbs are faulty Call the after-sales service
1,2 and
7
light up.
The grease filter is saturated. Clean the filter; see section Cleaning
and maintenance .
3, ˜ and 7 light up.
The activated charcoal filter is saturated. Replace the filter; see the 'CleanAir air
recirculation module' printed supple-
ment.