NEFF I90CL46N0, Инструкция по эксплуатации

Страница: 5 / 12

5
Operating the appliance
Note:
Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Controls
Use the remote control to set and adjust the various different
functions of your appliance.
Note:
The remote control requires AAA/LR03/1.5 V batteries.
Refer to the Changing the batteries in the remote control
section for instructions on how to insert the batteries.
Note:
Point as accurately as you can with the remote control to
the infrared receiver on the extractor hood's control panel.
Note:
Heat and penetrating moisture may damage the remote
control. Never expose the remote control to intense heat or
moisture.
Remote control
Operating buttons
Extractor hood's control panel
Operating buttons
Switching the appliance on and off
Note:
Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a high
fan setting.
Switching on the appliance
Press the
¶
button on the remote control or the
#
button on
the extractor hood's control panel.
The extractor hood starts at power setting 1.
The
#
button lights up.
Selecting the fan setting
Press the @ or A button on the remote control or the # , 9 2
or 8 3 button on the extractor hood's control panel for the fan
setting you require.
The
# button will light up when power setting 1 has been
selected.
The
# and 9 2 buttons will light up when power setting 2 has
been selected.
The
# , 9 2 and 8 3 buttons will light up when power
setting 3 has been selected.
Switching off the appliance
Press the
¶
button on the remote control or the
#
button on
the extractor hood's control panel.
Intensive setting
Activate intensive mode to eliminate strong smells and odours.
In this mode, the extractor hood operates at its maximum fan
setting for a short time. After a short time, it automatically
switches back to a low setting.
Switching on
Press the † button on the remote control or the ˜ button on
the extractor hood's control panel.
The
# , 9 2 and 8 3 buttons will light up and the ˜ button will
flash. Intensive mode is activated.
Note:
After 6 minutes, the extractor hood automatically
switches back to the fan setting that was set beforehand.
Switching off
Press the
†
button on the remote control or the
#
button on
the extractor hood's control panel.
Button Explanation
K
Switches on the run-on function/intermittent
function
@
Increases the power setting
¶
Switches the extractor hood on and off
<
Switches the lighting on and off
A
Reduces the power setting
†
Switches on intensive mode
(
Infrared receiver
0
Operating buttons
8
Saturation indicator
Button Explanation
6
Switches the lighting on and off
#
Switches off the extractor hood/switches on
fan setting 1
9
2
Switches on fan setting 2
8
3
Switches on fan setting 3
˜
Switches on intensive mode