en
23
Electrical connection
The socket must be near the appliance
and also freely accessible
following installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating
current via a correctly installed socket
with protective conductor. The socket
must be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type
match the values of your mains supply.
This information can be found on the
rating plate. Fig.
8
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer to
several models.
The features of the models may vary.
The diagrams may differ.
Fig.
1
Controls
Fig.
2
1-5
Controls
6
Freezer shelf
7
Frozen food container
1
Temperature controller
Is used to set the freezer
compartment temperature.
2
On/Off button
Serves to switch the whole
appliance on and off.
3
“super” button
Switches super freezing on and
off.
Illuminates when super freezing is
on.
4
Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
5
Alarm display
Lights up if the freezer
compartment becomes too warm.
It goes out when the freezer
compartment has reached the set
temperature.
