NEFF High Speed Screw Jack G1-G3
3
1.5
General Safety Instructions
The following warnings, preventive measures and instructions are intended to guarantee
your safety and to avoid damage to the lifting gear or the components connected to it. This
chapter contains warnings and instructions that generally apply to the handling of the lifting
gear.
Intended Use:
The G1-G3 High Speed Screw Jacks are intended only to carry out lifting, lowering, tilting and
feeding motions.
Please find lifting capacities in our catalog or at
Any other use is considered misuse. The manufacturer assumes no liability for any damage
resulting from misuse.
If the device is installed in machines or plants, commissioning is prohibited until it is
determined that it complies with the EC machinery directive.
Attention!
Requirement according to the German accident prevention regulations VBG14 / VBG 70:
If High Speed Screw Jacks are operated in theatre stages (VBG 70), lifting platforms (VBG 14) or
lifting equipment where there is a danger to persons, we generally recommend using a safety
nut for fall protection.
Attention!
This operating manual must be kept close to the device and be easily accessible and available
to all users.
Attention!
Risk of damage to the lifting gear resulting from storage and transport.
Correct storage, installation and assembly as well as diligent operation and maintenance are
prerequisites for the trouble-free and safe operation of the High Speed Screw Jacks.
The High Speed Screw Jacks must be protected against mechanical impacts and vibrations
during transport and storage.
Warning!
Work on live components:
E.g. installation of limit switches or a drive unit must only be carried out by trained electricians.
