6
Remove the filters one by one.
Filters and maintenance
Any kind of bending of the filters has to be
avoided when washing them. Before fitting
them again into the hood make sure that they
are completely dry. (The colour of the filter sur
-
face may change throughout the time but this
has no influence to the filter efficiency).
Put the clean filters back on the Grid in its place
Hook the security chain and put back the Grid
onto the hood.
A
B
Activated carbon filter:
For neutralizing odours in recirculating mode.
Caution:
As the filter becomes more and more saturated with
grease, there is an increased risk of fire and the
function of the hood may be impaired.
Important:
Change the activated carbon filter promptly to pre
-
vent the risk of fire from the accumulation of heat
when deep-fat frying or roasting.
These filters are not washable and cannot be regen
-
erated, and must be replaced approximately every
year of operation, or more frequently with heavy
usage.
Replacing the activated carbon filter
Unhook the filter-holding Grid (see “Removing
and inserting metal self- supporting grease
filters”)
Remove the saturated activated carbon filter as
shown (
A
).
Fit the new filters (B
). Filter can be ordered at
the customer service
Filters and maintenance
Hook the filter-holding Grid (see “Removing
and inserting metal self- supporting grease
filters”)
Disposal of the old activated carbon filter:
Activated carbon filters do not contain any
harmful substances. They can be disposed of
as residual waste.
