NEFF D96IKW1S0B Скачать руководство пользователя страница 10

Страница: 10 / 24

Connecting to a hob

Connecting to a hob

Connectin

g to a ho

You can connect this appliance to a hob and then

control the functions of the hood via your hob.
Appliances can be connected to each other in different

ways:

Connecting appliances directly

If the appliance is connected directly to a hob, it cannot

be connected to your home network as well. The

appliance works like an extractor hood that is not

connected to the network and you can continue to

operate it via the control panel.

Connecting appliances via your home network

You can connect the appliance to the hob via your

home network and make use of the existing

infrastructure.

Notes

■

Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the hob.

■

Using the controls on the extractor hood always take

priority. It is not possible to use the hood controls on

the hob during this time.

Setting up a connection

The hood must be switched on before you can connect

the hob and extractor hood.
Make sure that the hob is switched on and is in search

mode.
Refer to your hob's instruction manual for more

information.

Connecting directly

Press and hold the

and

symbols at the same

time until the

and

indicators start flashing.

Confirm the connection on the hob within the next

30 seconds.

The extractor hood has been connected to the hob

when the

stops flashing and stays permanently lit.

Connecting via your home network

Notes

■

You require a router that has WPS functionality.

■

You require access to your router.

■

The extractor hood cannot be switched on during the

connection process. You can cancel the process at

any time by pressing the

symbol.

Press and hold the

and

symbols at the same

time until the

and

indicators start flashing.

Tap the + symbol to start automatic login on your

home network.

and

‚

will flash.

Press the WPS button on the router within the next

2 minutes.

Once the connection to your home network has

been set up, the extractor hood will connect to the

hob automatically.

and

„

will flash.

The connection is process is complete when the

indicator stops flashing on the control panel and stays

permanently lit.

Note:

Connection will only be successful if both

appliances are connected to your home network and in

search mode. If the time allowed for search mode runs

out on one of the two appliances, start the search

again.

Resetting the connection

You can reset the connections you have saved on your

home network and on the hob at any time.
Press and hold the

and

‘

symbols at the same time

until a signal sounds.

Содержание D96IKW1S0B

























Результаты поиска

Содержание D96IKW1S0B

Отзывы:

Бренды по названию

Популярные бренды

NEFF D96IKW1S0B, Руководство пользователя

Результаты поиска

Содержание D96IKW1S0B

Отзывы:

Бренды по названию

Популярные бренды