background image

9

INSTALLATION INSTRUCTIONS

Installation instructions

This appliance is installed on the wall.

Follow the enclosed installation instructions for additional 

special accessories (e.g. for circulating-air mode).

The surfaces of the appliance are sensitive. Avoid damaging 

them during installation. 

Important safety information

Read these instructions carefully. Only then 

will you be able to operate your appliance 

safely and correctly. Retain the instruction 

manual and installation instructions for 

future use or for subsequent owners.
The appliance can only be used safely if it 

is correctly installed according to the safety 

instructions. The installer is responsible for 

ensuring that the appliance works perfectly 

at its installation location.
The width of the extractor hood must 

correspond at least with the width of the 

hob.
For the installation, observe the currently 

valid building regulations and the 

regulations of the local electricity and gas 

suppliers.
When conveying the exhaust air, official and 

legal regulations (e.g. state building 

regulations) must be followed.

Risk of death!

Risk of poisoning from flue gases that are 

drawn back in. The exhaust air must not be 

conveyed into a functioning smoke or 

exhaust gas flue or into a shaft which is 

used to ventilate installation rooms that 

contain heating appliances. If the exhaust 

air is to be conveyed into a non-functioning 

smoke or exhaust gas flue, you must obtain 

the consent of the heating engineer 

responsible.

Danger of death!

Risk of poisoning from flue gases that are 

drawn back in.
Always ensure adequate fresh air in the 

room if the appliance is being operated in 

exhaust air mode at the same time as room 

air-dependent heat-producing appliance is 

being operated.

PLQ

PLQ

PLQ

!

!

[

[

[

[

[

[

Содержание D66B21N0GB

















Отзывы: