NEFF D65IFN1S0, Руководство пользователя и инструкции по установке

Страница: 12 / 24

en
Troubleshooting
12
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from customer service
or the online shop.
3. Start the dishwasher.
Select a temperature of no more than 70 °C.
4. Allow the grease filters to drain.
11.8 Fitting grease filters
ATTENTION!
Falling grease filters may damage the hob below.
▶
Grip below the grease filter with one hand.
1. Using two hands, open the glass panel fully until the
glass support engages.
2. Insert the grease filters.
3.
Fold the grease filters upwards and engage the
locks.
4.
Ensure that the locks engage.
5. Using two hands, lift the glass panel slightly and
close it fully.
T rou ble s h ootin g
12 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
→ "Customer Service", Page 13
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
12.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
The plug connection to the glass plate has not been established correctly.
▶
Check the plug connection to the glass plate.
The LED lighting
does not work.
Different causes are possible.
▶
Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
▶
Call
→
"Customer Service", Page 13
.
The button illumina-
tion does not work.
Different causes are possible.
▶
Call
→
"Customer Service", Page 13
.
Home Connect is not
working properly.
Different causes are possible.
▶
Go to www.home-connect.com.
The hob-based hood
control is not working
properly.
It may be necessary to change the settings.
▶
Read the instruction manual for the hob.
▶
Go to www.home-connect.com.