NEFF D64XAF8N0, Руководство пользователя

Страница: 12 / 20

en
Cleaning and maintenance
12
Selecting a fan setting
▶
Set the control knob to any fan set-
ting.
Switching off the appliance
▶
Set the control knob to ⁠.
Switching on the lighting
1.
Set the control knob to .
2.
To use the lighting at the same time
as a fan setting, set the control knob
to
, or ⁠.
Switching off the lighting
▶
Set the control knob to ⁠.
Cleaning and mainten-
ance
To keep your appliance looking its best
and working efficiently for a long time,
it is important to clean and maintain it
carefully.
Cleaning products
You can obtain suitable cleaning
products from after-sales service or the
online shop.
WARNING
Risk of electric shock!
Penetrating moisture may cause elec-
tric shock.
▶
Do not use any steam cleaners or
high-pressure cleaners to clean the
appliance.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appliance.
▶
Do not use harsh or abrasive deter-
gents.
▶
Do not use cleaning products with a
high alcohol content.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Do not use any special cleaners for
cleaning the appliance while it is hot.
▶
Do not use limescale remover on the
door handle or control panel, as it
may leave permanent staining.
▶
Only use glass cleaners, glass
scrapers or stainless steel care
products if recommended in the
cleaning instructions for the relevant
part.
▶
Wash sponge cloths thoroughly be-
fore use.
Cleaning the stainless steel
surfaces
1.
Observe the information regarding
the cleaning agents.
→
"Cleaning products", Page 12
2.
Clean using a sponge cloth and hot
soapy water in the direction of the
finish.
3.
Dry with a soft cloth.
4.
Apply a thin layer of the stainless
steel cleaning product with a soft
cloth.
Tip:
You can obtain stainless steel
cleaning products from after-sales ser-
vice or the online shop.
Cleaning painted surfaces
1.
Observe the information regarding
the cleaning agents.
→
"Cleaning products", Page 12
2.
Clean using a sponge cloth and hot
soapy water in the direction of the
finish.
3.
Dry with a soft cloth.