NEFF C29MR21.0, Руководство пользователя и инструкции по установке

Страница: 12 / 44

en
Before using for the first time
12
6.3 Sliding accessories into the cooking
compartment
Always slide the accessory into the cooking compart-
ment the right way round. This is the only way to en-
sure that accessories can be pulled out approximately
halfway without tipping.
1. Turn the accessories so that the notch is at the
rear and is facing downwards.
2. Insert the accessory between the two guide rods for
a shelf position.
Wire rack Insert the wire rack with the open
side facing the appliance door.
Tray
E.g. univer-
sal pan or
baking tray
Slide the tray in with the sloping
edge towards the appliance door.
3.
Push the accessory all the way in, making sure that
it does not touch the appliance door.
Note:
Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
6.4 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.neff-international.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
7 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7.1 Initial use
After connecting the appliance to the power supply,
you must configure the settings for its initial start-up. It
may take a few minutes for the settings to appear on
the display.
Notes
¡
You can adjust the settings at any time in the basic
settings.
→ "Basic settings", Page 19
¡
You can also use Home Connect to configure the
settings. When your appliance is connected, follow
the instructions in the app.
→ "Home Connect ", Page 20
Setting the language
Requirement: The appliance is connected to the power
supply.
1. Press to switch the appliance on.
2. Use the ⁠ or ⁠ button to select the language.
3. Press the required language.
4. Press to confirm the language.
Setting up Home Connect
Note: You can skip Home Connect set-up by pressing
"Later". Next, set the clock.
1. Press "Connect" to set up Home Connect.
→ "Home Connect ", Page 20
2. Make all other settings for initial start-up in the
Home Connect app.
Setting the time
1.
Use or to select the hours.
2. Press the minutes.
3.
Use ⁠ or ⁠ to select the minutes.
4. Press to confirm the time.
Setting the date
1. Use or to select the year.
2.
Press the month.
3. Use or to select the month.
4.
Press the day.
5. Use or to select the day.
6.
Press to confirm the date.
7. Press "OK" to end the initial start-up.
8.
Open and close the appliance door once.
a
The appliance will perform a self-test, after which it
will be ready to use.
a
The initial start-up is now complete.