NEFF C24GR3X 1 Series, Руководство пользователя и инструкции по установке

Страница: 16 / 36

en
Childproof lock
16
12.3 Setting a delayed operation "Ready at"
You can delay the time at which the cooking time for
the operation is due to end by up to 24 hours.
Notes
¡
To achieve good cooking results, do not delay the
time once the operation has already started.
¡
Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡
An operating mode and level have been set.
¡
A cooking time has been set.
1. Press "Ready at".
2. Use and to set the minutes or select a predefined
value on the display.
3. To set the hours, press the hours.
4. Use and to set the hours or select a predefined
value on the display.
5. Press ⁠.
6. Press
a
The display shows the start time. The appliance is in
standby mode.
a
Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a
When the cooking time has elapsed, a signal
sounds. A message appears on the display confirm-
ing that the operation has finished.
a
7.
Once the cooking time has elapsed, perform one of
the following actions:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use to switch the ap-
pliance off.
Changing a delayed operation "Ready at"
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1. Press ⁠.
2. Press "Ready at".
3. Set the required end time.
4. Press ⁠.
Cancelling a delayed operation "Ready at"
1. Press ⁠.
2. "Ready at".
3.
Use to reset the time.
4. Press ⁠.
12.4 Setting the timer
The timer runs independently during the operation. You
can set the timer for a time up to 24 hours. The timer
has its own signal so that you can tell whether it is the
timer or a cooking time that has elapsed.
1. Press ⁠.
a
The minutes are selected.
2.
Use and to set the minutes or select a predefined
value on the display.
3.
To set the hours, press the hours.
4. Use and to set the hours or select a predefined
value on the display.
5. To set the seconds, press the seconds.
6.
Use and to set the seconds or select a pre-
defined value on the display.
7.
To start the timer, press on the display.
a
The timer starts.
a
The timer remains visible on the display if the appli-
ance is switched off.
a
When the appliance is switched on, the display
shows the settings for the current operation. Press
to display the timer.
a
Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
Ending the timer
Requirement: A signal sounds.
▶
Press ⁠.
a
The timer is switched off.
Changing the timer
You can change the timer at any time.
1. Press ⁠.
2.
Press ⁠.
3. Set the timer.
4.
Press to start the timer.
Cancelling the timer
You can cancel the timer at any time.
1. Press ⁠.
2.
Reset the timer using ⁠.
3. Press to close the timer.
13 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
13.1 Activating the childproof lock
1. Press ⁠.
2.
Press ⁠.
a
The controls are locked.
a
If a timer duration has been set, this continues to
count down. While the childproof lock is active, the
timer duration cannot be changed. Signal tones,
e.g. when the timer duration has elapsed, can be
ended by pressing any button.
13.2 Deactivating the childproof lock
1. Press ⁠.
2.
Press and hold "Unlock" for approx. 4 seconds.
a
The controls are unlocked.